P-Series Economical Power Pack Magnetic Current Generators

P-Series portable power packs are convenient and economical inspection units that are used in a wide range of magnetic particle inspection applications that require only moderate power. These portable electromagntic current generators are ideal for inspecting large or heavy parts, in-service mobile equipment or job-site weld testing with magnetic particle inspection NDT method. P-Series power packs are availble in two configurations P-70 and P-1500 to meet a variety of mag particle inspection needs. Click on the tabs below for more details on these configurations. Comparison P-70 P-1500 Contact Current Capacity (amps)* AC 750 1,500 HWDC 750 1,500 Dimensions 17.5 x 9 x 7.5 in / 44.5 x 23 x 19 cm 22 x 9.5 x 9.5 in / 56 x 24 x 24 cm Weight 35 lb / 16 kg 93 lb / 42 kg * Ratings based on use of two 15-foot lengths of 4/0 cable (30 feet total)

Beneficios

Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for near-surface flaws
Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
Infinitely variable current control
Demagnetize parts in AC mode by slowly turning the current dial to zero
Built-in automatic-reset circuit breaker
May be used as the main power source for the Mag Kit modular bench inspection system
All P-70 and P-1500 portable power packs come with a 15 ft / 4.5 m remote control cable (PN 626797)
Length: 17.5" (44.5 cm)
Width: 9" (22.9 cm)
Height: 8" (20.3 cm)
Maximum Output*: 750 amps, AC or HWDC
Available Voltages: 115,230, 50 or 60 Hertz; single phase power